‘Ayush’ Air Cooled Pumps are particularly suitable for use in heat transfer systems or for hot oil circulation. Hence it is also called Air Cooled Thermic Fluid Centrifugal Pumps or Industrial Air Cooled Hot Oil Pump.

They are the ideal choice for handling mineral-based and synthetic heat transfer fluids. The particularly high levels of operating reliability. In addition, these variants feature anti-seize carbon plain bearings lubricated by the fluid handled and an extra robust design.

AIR COOLED PUMP

Technical Details

  • Easily dismantled bearing bracket
  • Single mechanical seal in tandem arrangement
  • Shaft seal rings between mechanical seal and bearing protect the deep groove ball bearing
  • against ingress of the heat transfer fluid
  • Impeller secured by Nord-Lock washers for maximum operating reliability
  • Reinforced C4 type deep-groove ball bearing with special grease fill for long service life
  • Optimized hydraulic system for high efficiency
  • Impellers trimmed as standard for pump operation at best efficiency point
  • The complete back pull-out unit can be pulled out without having to remove the pump casing from the piping.
  • Brand – Ayush Pump
  • Series –  ACP
  • Pump Type – Centrifugal Air Cooled Pump
  • Body Materials – CS WCB, SS304, SS316
  • Pump Size – DN 25 to 200 mm
  • Max Flow Rate – Up to 300 M³H
  • Min Head –  30 Meter
  • Max Pressure –  40 kg/cm2
  • Max Temp – 200° C
  • Operate – Three Phase
  • Oil Type – Edible Oil / Thermic oil
  • Thermic Fluid Handling
  • Hot Oil Transfer
  • Baking and Heating Applications
  • Chemical Dosing
  • Solvent Transfer
  • Synthetic Oil Transfer
  • Edible Oil Applications

Air Cooled Pump Manufacturer & Supplier | Air Cooled Thermic Fluid Process Pump | Air Cooled Thermic Fluid Centrifugal Pumps | Hot Oil Pump | Cooling Tower Pump | Industrial Air Cooled Hot Oil Pump | Hot Water Pump |  Horizontal Centrifugal Air Cooled Pump | Thermic Oil Pump