AYUSH PROCESS PUMP

It delivers flow up to 450 cubic metres per hour and head up to 100 metres, running at either 1450 or 2900 RPM depending on the model selected.

Irrigation and agriculture, firefighting systems, high rise building water supply, steel plants, HVAC circulation, cooling towers, water treatment plants and general utility duty in industry are common uses.

Yes, it follows DIN 24255 dimensional standards with flange drilling to DIN 2533 ND 16, which makes it interchangeable with other DIN standard process pumps on site.

Rinku Engineers manufactures this pump at its own works in G.I.D.C. Vatva, Ahmedabad, rather than sourcing it from a third party, which is why DIN standard interchangeability and custom shaft units are available directly.

Price depends on flow, head, motor rating and the RPM variant chosen, so an estimated quotation is prepared by Rinku Engineers once these details are confirmed with the buyer.

Contact Rinku Engineers at +91 98250 68004 or info@rinkuengineers.com, or use the website enquiry form, to receive a direct manufacturer quotation without dealer markup.

Yes, the AYUSH Process Pump is included in the range Rinku Engineers exports to the Middle East, Africa and Southeast Asia alongside domestic Indian supply.

It uses an enclosed impeller, dynamically balanced, with back vanes for hydraulic balance and, on larger sizes, balancing holes and back wear rings to reduce axial thrust.

Yes, the stuffing box accepts either gland packing or a mechanical seal, so the sealing method can be matched to the fluid and leak tolerance required.

Yes, cooling tower service and general HVAC water circulation are listed applications, supported by the pump’s DIN standard footprint and available speed options.

Deep groove ball bearings with standard grease lubrication are fitted, with oil lubrication available where the application calls for it.

Yes, water management in commercial and residential buildings, along with high rise water supply, are among its standard applications.

Three shaft units cover the complete size range, using high tensile steel shafts that are accurately machined, ground and protected by a shaft sleeve in the stuffing box area.

Yes, models are available at both 1450 and 2900 RPM, allowing the pump to be matched to different flow and head combinations within the same DIN 24255 frame series.

Yes, utility pumping in petroleum industries is a listed application alongside water treatment and general industrial process transfer.

Choose the process pump for flooded suction, DIN standard installations, and choose the self priming pump where suction lift or intermittent dry running is expected, and Rinku Engineers can advise based on your layout.

Technical support, spare parts and service guidance are provided directly by Rinku Engineers from its Ahmedabad base, since the pump is manufactured in house.

Yes, Rinku Engineers has supplied process pumps to steel plants and other heavy industry for over 25 years, backed by ISO 9001:2015 certification.

Yes, bulk and project quantity enquiries can be sent through the contact page, and Rinku Engineers as the direct manufacturer can offer volume based pricing for larger orders.