Slurry Handling Pump consist Number of Casing and Number Of Impellers for High Pressure Application.
Casing :
- Extra Corrosion Allowance
- Heavy duty design
- More Wall Thickness more.
- Better resistance to Pipe loads Flanges are class 150.
- Top CentrelineSelf Venting.
Impeller :
- Fully Open Design Back Pump out Vanes Balancing Impeller Seal Ring
- Wear area much more than Closed Impeller Reduces Stuffing Box Pressure For Extended Bearing life, less vibrations. Protracts threads against Corrosion.
Stuffing Box
- Enlarged Bores
- Improve lubrication and cooling of seal faces.
Bearing Frame
- Large Oil Sump Standard Water Jacket Frame Foot Adaptor
- Bearings run cooler and longer. Additional Cooling for Temp. Above 100deg.
- Rigid design to reduce effects on pipe loads on pump motor Alignment For Strength and safety.
Shaft Vs diameter.
- Optimum overhang
- Low deflection 0.05 mm of seal faces for longer seal and Bearing life.
- Hook type Sleeve
- Accommodates balanced seals
Bearings
- Optimized sizes and Configuration
- Provided extended long life.
Applications of Slurry Handling Pump
- Distillation plants
- Baking ovens
- Polymerization plants and cooling of reaction systems
- Bitumen tank farms
- Roofing felt production systems
- Heavy oil plants
- Bottle cleaning systems
- Starch-drying systems
- Soap and detergent industry
- Wood and paper industry
- Construction, quarrying and earth industries
Capacity : Up to 400 m3/hr.
Head : up to 100 mtrs.
AYUSH Slurry Handling Pump (AHPMT/ST) – FAQs
It is a heavy duty centrifugal pump built to move abrasive, high pressure slurries in process industries, manufactured by Rinku Engineers in Ahmedabad, Gujarat.
The AHPMT/ST series delivers flow up to 400 cubic metres per hour and head up to 100 metres, suited to demanding slurry transfer duties.
An extra corrosion allowance, heavy duty casing with greater wall thickness, and a fully open impeller with back pump out vanes reduce wear from suspended solids compared to a standard centrifugal pump.
Rinku Engineers manufactures this pump at its own works in G.I.D.C. Vatva, Ahmedabad, applying heavy duty casing and bearing frame design specifically for abrasive service.
Distillation plants, baking ovens, polymerization plants, bitumen tank farms, roofing felt production, heavy oil plants, starch drying systems, the soap and detergent industry, and construction or quarrying operations all use this pump.
Price depends on capacity, head and casing material required for the specific slurry, so Rinku Engineers prepares an estimated quotation once the application is described.
Yes, Rinku Engineers sells the AHPMT/ST series directly through its Ahmedabad office by phone, email or the website enquiry form, without a reseller markup.
Yes, the slurry handling pump is included in the AYUSH range Rinku Engineers exports to the Middle East, Africa and Southeast Asia.
It uses a fully open impeller with back pump out vanes and a balancing seal ring, which increases the wear area compared to a closed impeller and reduces stuffing box pressure.
A large oil sump with a standard water jacket frame foot adaptor gives additional cooling for temperatures above 100 degrees Celsius, so bearings run cooler over longer service intervals.
Yes, the wood and paper industry is a listed application, along with bottle cleaning systems and other process duties involving suspended solids.
The casing uses class 150 flanges with a top centreline self venting design, which improves resistance to pipe loads compared to lighter duty pump casings.
Yes, construction, quarrying and earth handling industries are listed applications, supported by the pump’s heavy duty casing and wear resistant impeller design.
An optimised shaft diameter and overhang, combined with a hook type sleeve, keeps seal face deflection to around 0.05 millimetres, which extends both seal and bearing life.
Yes, bitumen tank farms and heavy oil plants are listed applications, aided by the pump’s extra corrosion allowance and reinforced casing.
Genuine wear parts, impellers and casings are available directly from Rinku Engineers, along with technical guidance on material selection for specific slurry compositions.
Yes, the soap and detergent industry is a listed application, along with cooling of reaction systems in polymerization plants.
Yes, with over 25 years of manufacturing experience and ISO 9001:2015 certification, Rinku Engineers supplies slurry handling pumps to process industries across India and for export.
Choose the AHPMT/ST slurry pump for general high pressure abrasive transfer, and the side suction filter press pump specifically for feeding filter presses with low pulsation; Rinku Engineers can advise based on the process.
It is manufactured at Rinku Engineers’ facility in Phase-I, G.I.D.C. Vatva, Ahmedabad 382445, Gujarat, India.