Features
These are single stage, single suction, horizontal shaft type. They are made in accordance with DIN 24255.
Models are available to operate at 1450 rpm and 2900 rpm.
Casing :
End suction, Volute type with top centreline discharge. Suction and discharge nozzles as well as the supporting feet are cast integral with the casting.
Impeller :
Enclosed type and accurately balanced dynamically. Hydraulically balanced by back vanes and for large
Impellers by balancing holes and back wear rings.
Shaft:
Three Shaft Units cover complete range. The high tensile steel shaft accurately machined and ground is supported by antifriction bearings. The shaft is protected by shaft sleeve from wear in stuffing box area.
Stuffing Box :
The Stuffing Box can be sealed by gland packing or mechanical seal.
Bearing :
Deep groove ball bearings are provided. Standard lubrication is grease. Oil Lubrication against requirement.
Flanges :
Standard drilling as per DIN 2533 ND 16
